CASO Germany IMG23 - Manual (Page 65)

caso IMG23/IMG25 65
14.2 Error code E-1
Faulty microwave function:
The display shows E-1 and a beep is constantly repeated. Please contact customer service.
You can press Pause/Cancel to stop the beep.
ATTENTION
► Only use the device again once it has been inspected by customer service.
14.3 Causes and rectification of faults
The following table assists in localizing and rectifying minor faults.
Error Possible cause Action
The selected program will
not start.
Device door is not closed Close device door
Power plug is not plugged in Plug in mains plug!
Fuse is not activated Activate fuse
The turntable turns jerkily.
Dirt between the turntable
and the base of cooking
camber
Remove dirt
Dirt on rolling ring
Cooking vessel too large Use different cooking vessel
Food is not sufficiently
defrosted, warmed up or
cooked after preset time
has elapsed.
Incorrectly selected time or
power level
Re-set time and power level
Repeat process
The device functions but
the cooking chamber
lighting does not work.
Defective cooking chamber
light. Have Service dept repair
cooking chamber light.
Abnormal noises can be
heard during operation of
microwave.
Food is covered with
aluminium foil
Remove aluminium foil
The cookware contains metal
and sparks are being created
within the cooking chamber
Observe information on
cookware!
The time in the display
field is not correct.
Power failure Re-set time
Attention
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.