1 intended use, 2 general safety information, Warning – CASO Germany MR3X ACID ETCHED Grater User Manual

Page 25

Advertising
background image

caso MR3X Acid Etched

25

12.1 Intended use

IMPORTANT: This appliance is intended for HOUSEHOLD USE ONLY. It is designed for
home use and is not suitable for commercial application.

This device is only intended for use in households in enclosed spaces for

cutting

grating

rasping

foods. Uses for a different purpose or for a purpose which exceeds this description are
considered incompatible with the intended or designated use.

Do not chop very hard ingredients such as coffee beans or ice.

Warning

Danger due to unintended use!

Dangers can emanate from the device if it is used for an unintended use and/or a different
kind of use.
► Use the device exclusively for its intended use.
► Observe the procedural methods described in this Operating Manual.
Claims of all kinds due to damages resulting from unintended uses are excluded.

The User bears the sole risk.

12.2 General Safety information

Please note

Please observe the following general safety notices with regard to the safe handling
of the device.
► Examine the device for any visible external damages prior to using it. Never put a

damaged device into operation.

► If the power cable is damaged, it must be replaced by the manufacturer, its service

department or a similarly qualified person, in order to prevent any hazards. Do not
leave the appliance unattended during operation.

► Do not leave the device unsupervised when it is in operation.
► This appliance can be used by children aged 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.

► Children shall not play with the appliance.
► Cleaning and user maintenance shall not be made by children without supervision.
► Do not operate the appliance with wet hands and do not run at no-load.
► Make sure that the mains connection cable does not come into contact with sharp

edges and/or hot surfaces.

Advertising