Catler GR 4011 - Manual (Page 14)

12
CARE AND CLEANING
CARE AND CLEANING
Before cleaning, turn the power off at the
power outlet and then remove the plug.
Allow your Contact Grill to cool before
cleaning. The unit is easier to clean when
slightly warm.
Always clean your Contact Grill after each use
to prevent a build up of baked-on foods.
Wipe cooking plates with a soft cloth to
remove food residue. For baked on food
residue squeeze some warm water mixed
with detergent over the food residue then
clean with a non abrasive plastic scouring
pad.
The cooking plates are coated with a non-
stick surface, do not use abrasives.Do not use
spray-on nonstick coatings as this will aff ect
the performance of the non-stick surface on the
cooking plates.
NOTE
CLEANING THE DRIP TRAY
Remove and empty the Drip Tray after each
use and wash the tray in warm, soapy water.
Avoid the use of scouring pads or harsh
detergents as they may damage the surface.
Rinse and dry thoroughly with a clean, soft
cloth and replace.
QUANTANIUM SCRATCH RESISTANT
COATING
Your Contact Grill features a special scratch
resistant non-stick coating that makes it safe
to use metal utensils when cooking.
Regardless of this fact, Catler recommends
that care is taken with the non-stick coating
particularly when using metal utensils.
Do not use sharp objects or cut food inside
the Contact Grill. Catler will not be liable
for damage to the non-stick coating where
metal utensils have been misused.
Cooking on a non-stick surface minimises the
need for oil, food does not stick and cleaning
is easier.
Any discolouration that may occur will
only detract from the appearance of the
Contact Grill and will not aff ect the cooking
performance.
When cleaning the non-stick coating, do not
use metal (or other abrasive) scourers. Wash
with warm soapy water. Remove stubborn
residue with a non abrasive plastic scouring
pad or nylon washing brush.
DO NOT IMMERSE ANY PART OF THE CONTACT GRILL IN WATER OR ANY
OTHER LIQUID.
Premium
NON-STICK SCRATCH RESISTANT SURFACE
* Superior non-stick top coat
* Titanium reinforced mid coat
* Titanium reinforced primer
* Base