Before first use – Catler TM 8010 User Manual

Page 13

Advertising
background image

13

13

BEFORE FIRST USE

BEFORE FIRST USE

Preparing the Tea Maker for Use

In order to remove any dust or protective resi-
dues from the manufacturing process, it is re-
commended to run a boiling cycle then discard
the water. Repeat this step 2 - 3 times if needed.

1. Remove and safely discard any packing ma-

terial, promotional labels and tape from the
Tea Maker.

2. Remove the Jug Lid then remove the Tea

Basket from the magnetic post within the
Glass Jug. Wash the Jug Lid, Tea Basket, Bas-
ket Lid and Tea Scoop in warm soapy water
with a soft sponge, rinse and dry thorough-
ly.

WARNING:

NEVER IMMERSE THE BASE OF THE
GLASS JUG, THE POWER BASE, POWER
CORD OR POWER PLUG IN WATER OR AL-
LOW MOISTURE TO COME IN CONTACT
WITH THESE PARTS.

3. Place the Power Base on a flat, dry surface.

4. Without the Tea Basket in place, fill the Glass

Jug to the water maximum mark (1500 ml
WATER MAX) and place on the Power Base.
Securely fit the Jug Lid onto the Glass Jug.

WARNING:

NEVER FILL THE GLASS JUG WITH
CHILLED WATER. ALLOW THE TEA MAKER
TO COOL BEFORE REFILLING.

WARNING:

FILLING PAST THE ‚MAX‘ LINE MAY RE-
SULT IN SERIOUS BURNS OR INJURIES
AS A  RESULT OF OVERFLOWING HOT
OR BOILING WATER. FILLING BELOW
THE ‚MIN‘ LINE WILL RESULT IN THE TEA
MAKER SWITCHING OFF BEFORE THE
WATER HAS BOILED OR REACHED THE
SELECTED TEMPERATURE.

5. Unwind the power cord completely and in-

sert the power plug into a  grounded wall
outlet.

6. The LCD screen will illuminate with the de-

fault brew temperature and brew time dis-
play.

7. Press the left

ARROW UP button until the

LCD screen displays 100°C.

The ‚Custom‘ LED will automatically illumi-
nate.

8. Press the HOT WATER|Cancel button to start the

cycle. The button surround will illuminate and
the LCD screen will display ‚ON‘ and the real-
time heating progress in increments of 5°C.

9. Once the water reaches 100°C, the tea alert will

sound three times and the HOT WATER|Cancel
button surround will cease to illuminate.

10. Discard the water. The Tea Maker is now

ready to use.

Advertising