Catler TM 8010 - Manual (Page 22)

22
ADDITIONAL FEATURES OF YOUR TEA MAKER TM 8010
- Once the brewing is complete, the LCD
screen will automatically display the
‘Time Since Brew’ function. This func-
tion counts up to a maximum of 60 min-
utes, allowing you to monitor the fresh-
ness of your brew. It does not activate
the heating elements.
NOTE:
If you leave the basket lowered for
maximum time (60 minutes), then after
elapsing this time, the basket will auto-
matically rise.
NOTE:
Once a customised time has been se-
lected and one tea making or water
heating cycle has been activated, the
customised time will remain in the
memory of the Tea Maker until you
change it. To return to default settings,
see Page 28.
Auto Start Feature
This feature allows you to program the specifi c
time when the Tea Maker will automatically turn
on and start either a tea brewing cycle or water
heating cycle.
Setting the ‘Auto Start’ Feature
1. Press and hold the AUTO START button for
2 seconds. The button surround will illumi-
nate and the tea alert will sound.
2. The LCD screen will display the AUTO
START clock symbol and a blinking CUR-
RENT TIME and START TIME.
3. To set the CURRENT TIME, press the left
ARROW UP button to increase the time, or
the left
ARROW DOWN button to de-
crease the time in 1 minute increments. En-
sure the correct ‘AM’ or ‘PM’ is displayed.
4. To set the START TIME, press the right
tARROW UP button to increase the time,
or the right
ARROW DOWN button to
decrease the time in 1 minute increments.
Ensure the correct ‘AM’ or ‘PM’ is displayed.
NOTE:
Pressing and holding the
ARROW UP
button or ARROW DOWN button will
increase the scrolling speed.
NOTE:
The Tea Maker will be turned on in the
last used mode. Before turn on, check
the temperature (tea type) and brewing
time (tea strength).
5. Once current time and start time are pro-
grammed, press either the fl ashing HOT
WATER|Cancel or TEA|Cancel button to se-
lect which feature you would like to start at
the programmed time.
6. The LCD screen will display the current time
and start time, in addition to the . AUTO
START symbol. The AUTO START button
surround will illuminate and remain illumi-
nated until the START TIME is reached, indi-
cating that the ‘Auto Start’ feature has been
activated.
7. Ensure that the Tea Maker is prepared with:
a)
Suffi cient water in the Glass Jug and tea
leaves in the Basket for the tea brewing
cycle or,
b) Suffi cient water in the Glass Jug for the
water heating cycle.
NOTE:
Insuffi
cient water may discolour your
teamaker base!