Catler TS 4010 - Manual (Page 8)

OPERATING YOUR TS 4010 TOASTER
6
OPERATING YOUR TS 4010 TOASTER
• Before fi rst use, remove any promotional
material attached to your toaster.
• Insert the power plug into a 230 volt
power outlet and then turn the power on.
• Place up to 2 slices of bread, muffi ns or
bagels into the bread slots.
• Select the desired browning setting using
the browning control dial. Colour settings
range from ‘1’ lightest to ‘9’ darkest.
• When using the toaster for the fi rst time,
we suggest you toast on setting No. 4.
Varying types of bread and personal
preference may require a diff erent
browning setting, eg: raisin toast and
white light textured breads may require a
lower setting, whilst heavier textured rye
breads may require a darker setting.
The toaster will remember your desired setting.
When the power is turned off to the toaster,
the digital control will default to your original
desired setting when next switched on.
NOTE
• Press the high lift lever down until it
clicks into place. Toasting cycle will
automatically commence. As the toasting
cycle progresses the LCD display will
count down and the toasting progress
indicator bars will go out until toasting is
complete.
If the toaster is not plugged in and switched on
at the power outlet, the high lift lever will not
click into place.
NOTE
„Lift and Look“
•
The TS 4010 Toaster has a ‘Lift and Look’
feature which does not interrupt the
cooking cycle. To check on the toasting
progression during the cooking cycle,
simply use the high lift lever to raise and
lower toast.
• The toaster turns off when the
desired toast colour is achieved and
automatically raises the toast. The
toasting process can be stopped at any
time by pressing the ‘Cancel’ button
located on the side of the toaster.
When the toasting cycle is complete, the toaster
will ‘beep’ to indicate that the toast is ready. No
need to wait while the toast cooks.
NOTE
„High Lift“
To remove smaller items such as crumpets
and muffi
ns, lift the high lift lever
approximately 20mm above the starting
position.
In the unlikely event that the bread or
crumpet becomes jammed, switch the
power off at the power outlet. Remove the
power plug from the power outlet and then
carefully ease the bread out of the toaster,
ensuring that you do not damage the
element.
DO NOT LEAVE UNATTENDED WHEN IN USE AS TOAST MAY JAM.