Step 6: install auxiliary fuel injector – BoonDocker ARCTIC CAT: Z1 Turbo Upgrade User Manual
Page 7
Advertising
BoonDocker Turbo Z-1 GT28/60
Revised 06/05/09 Arctic Cat Z-1 GT28/60 Turbo Upgrade Installation instructions
Page 7
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
Step 6: Install Auxiliary Fuel Injector
A. Should be completed before charge tub
installed. Install fuel injector, rail and brass
fitting into upper charge tube.
B. Install 5/16” brass tee into fuel presser
hose.
C. Install 5/16” hose from tee to fitting on fuel rail.
D. Tee red and purple wires from auxiliary injector harness to red and purple wires on female
Hijacker injector connector.
Use red wire in position #2
Advertising