BoonDocker KAWASAKI KX: 450 User Manual
Page 4
Revised 1/23/2014
Page 4 of 6
www.boondockers.com……………….....
……….………………....877-522-7805
13. Place exhaust gasket in-between inlet and
turbo & install exhaust bracket. Put bolts and
nuts into place.
14. Mount exhaust bracket to right rear fender.
Leave loose for mounting. Install muffler and
put inlet bolts into place with nut on. Tighten
actuator, exhaust brackets & exhaust inlet.
15. Route oil feed line through sub frame to the
left side and through the 3/4 hole. Make sure
rubbing won’t occur.
16. Route oil drain line to the right of Timber-
sled frame and hook to turbo. Zip tie to frame
and tighten clamp.
17. Install actuator solenoid lines. Follow the
control box instructions for proper installation.
18. If you have black Polly line you will need to
remove the line carefully from quick connec-
tions & install fuel line. If cutting stock fuel line
cut on straight of the line elsewhere might leak.