BoonDocker YAMAHA YZ-F: YZ450F - Manual (Page 4)

Revised 1/14/2014 Page 4 of ?
www.boondockers.com………………..... ……….………………....877-522-7805
13. Rout oil drain line as shown and zip tie to
Timbersled frame. Hook into the bottom of the
turbo. 14. route oil feed line as shown through the sub
frame. Zip tie it under the frame where the seat
& other parts don’t interfere. Hook on to turbo.
15. Install muffler and put inlet bolts into place
with nut on. Tighten inlet bolts, both bracket
bolts and then tighten outlet & actuator bolts. 16. Install charge tube with 2 hose clamps.
Loosen left side of the radiator to fit in and
position. Plug in auxiliary injector.
17. Install 90 deg. Charge tube and 90 deg.
Silicone with 2 hose clamps on each silicone
piece. Tighten all charge tube and intercooler
clamps where they will not rub on anything
after being positioned. 18. Cut stock fuel line on the straight part of the
line. Elsewhere might leak. Install auxiliary
injector and clamp both cut ends of stock line.