BoonDocker POLARIS RZR XP 1000 Turbo System - Manual (Page 3)

BoonDocker RZR 1000 Turbo
Revised 3/28/2014 Page 3 of 7
www.boondockers.com………………..... BoonDocker ……….………………....877-522-7805
7. Cut engine oil cooler coolant hoses at mid
point and T turbo coolant hose into each hose. 8. Remove plug from engine case located just in
front of the clutch cover. Install AN fitting, route
turbo drain hose to fitting and attach.
9. Remove plug and install AN fitting located
above magneto cover on passenger side of
engine. 10. Install oil feed hose. Be sure to route feed
hose away from header.
11. Install waste gate actuator and adjust rod
tension so that the waste gate door is held barely
closed. 12. Install air intake tube from stock air box to
turbo. Attach stock crank case vent hose to air
intake tube.