BoonDocker ARCTIC CAT: 800/1000 Turbo 3D - Manual (Page 5)

BoonDocker – 2379 Heyrend Way Idaho Falls, Idaho 83402 – (208) 542-4411
website: www.boondockers.com - email: [email protected]
Revised 03-14-07 Page 5 of 14
VI. Main Menu
The Main Menu is shown below:
Main  Fuel Stats
Menu Xtra Map1U
The current selection is shown by the Right-Arrow and the cursor (underscore below the “F”). Use the arrow keys to
move the cursor. Move the cursor to the desired menu option and press the “SEL” key.
Fuel
Go to the Fuel adjust menus.
Stats
Display runtime data, captured data, and recorded maximum data.
Xtra
Go to setup menus for off boost adjustments, and button options
Map
Go to the Map menu to store, lock, or change maps.
The current Map number is displayed as “Map1U”. This indicates that map number 1 is being used and it is Unlocked.
VII. Boost Fuel Adjust Menus
This selection is used to make fuel adjustments. There are seven Fuel adjust screens (examples shown below). Fuel
screen1 will be displayed after moving the cursor to the Fuel selection on the Main Menu and pressing the “SEL” button.
Go to the next screen by pressing the “SEL” button. After pressing the “SEL” on the last Fuel adjust screen, you will
return to the Main Menu. Use the Left/Right Arrow keys to switch between settings. Use the Up/Down Arrow keys to
change the setting values. Sample Fuel adjust screens are shown below (actual RPM settings and number of screens may
be different for your model).
Fuel screen:
psi  LO MD HI
4300 08 10 00
1. Fuel Screens (RPM Adjustments)
In the RPM screens, the Fuel Control Box allows fuel adjustments to be made according to the following two factors: RPM
and Engine Load while on Boost .
RPM Regions:
In the example above, the 4300 screen sets the fuel level for near 4300RPM and up to 5100. 5100 sets the fuel level for
RPMs near 5100. Between 4300 and 5100, the fuel adjustment will be proportioned between the two settings. For
example, suppose the 4300RPM fuel setting is at “4” and the 5100RPM fuel setting is at “8”. If engine is at 4700RPM, the
actual fuel adjustment made will be ½ of “4” and ½ of “8” which is “6”.
Throttle Position:
Each RPM Region is split into 3 throttle position ranges: closed throttle (idle) to 1/3 open, MD is 1/3 to 2/3 open, and HI is
2/3 to full open.
M1U

LO MD HI• • •
4300 00 00 00•••
Below is a description for each field show in the above sample screen: