Code 3 LED X Exterior Lights - Manual (Page 4)

In addition to the flashing models, The LED-EX1 is also available in two special function
versions:
The STT (Stop-Turn-Tail) version:
This version can be used as an Auxiliary stop-turn-tail light. When only the power (red)
and ground (black) wire are connected, the light will come on in a reduced intensity steady
burn tail-light mode. Grounding the white wire will result in a bright steady burn mode (stop-
light) mode.
The steady-burning (non-flashing) version:
This version can be used as a stand-alone steady-burning light or be flashed with an LED
flasher such as Code 3 PSELED12. This model has only two wires, a power (red) wire
and a ground (black) wire.
Options:
The LED-EX is available in five basic models:
· LXEX1F- A single head unit. The housing is available in black or brushed
aluminum finish. The sealed cover lens is available in clear or colored to
match the LED light output.
· LXEX2F- A dual head (over under) unit. The housing is available in black or
brushed aluminum finish. The sealed cover lens is available in clear or
colored to match the LED light output. Each head is individually controlled.
· LXEX125P-A single head unit. The housing is available in highly polished
aluminum (chrome-like appearance).
· LXEX73P- A dual head (side by side) unit. The housing is available in highly
polished aluminum (chrome-like appearance). For retrofit purposes, the
mounting hole pattern matches the mounting hole pattern of a series 40 (7x3)
perimeter light.
· LXEX64P-A dual head (over under) unit. The housing is available in highly
polished aluminum (chrome-like appearance). For retrofit purposes, the
mounting hole pattern matches the mounting hole pattern of a series 60 (4x6)
perimeter light, and the periphery of the unit matches the periphery of an
OsciLaser
TM lens.
4