Code 3 PSE LED F12 LED Output Flashers - Manual (Page 5)

5
Flash - Pattern Programming
1. To program the regular operation flash pattern, depress and release the momentary switch connected to
the Yellow wire to select a different flash pattern. Repeat until the desired pattern is selected.
2. To program the Interclear ® flash pattern, repeat No.1 using the momentary switch connected to the orange
wire. Note: The White wire (Interclear Enable) should be connected to +12V when programming
the Interclear pattern.
Figure5
1
2
3
4
5
6
7
8
9
10
11
12
4"
4"
4"
4"
4"
2.25"
2.25" 2.25"
2.25"
Mode
Control
Interclear
Pattern
PGM
Flash-Pattern
PGM
Power-In
Photocell
Input
18 AWG GREEN
18 AWG ORANGE
18 AWG BLUE
18 AWG RED
18 AWG YELLOW
18 AWG RED
16 AWG RED
16 AWG BLACK
18 AWG BLACK
18 AWG BROWN
POWER / CONTROL HARNESS
18 AWG WHITE