Clarion M335/M235 - Manual (Page 11)

M335/M235
13
English
9. TROUBLESHOOTING
Problem Cause Solution
Power does not turn on.
(No sound is produced.) Fuse is blown. Replace with a fuse of the same
amperage. If the fuse blows again,
consult your store of purchase.
Incorrect wiring. Consult your store of purchase.
Compact disc cannot be
loaded. Another compact disc is
already loaded. Eject the compact disc before loading
the new one.
Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft
cloth.
Compact disc is heavily
scratched or warped. Replace with a compact disc with no
scratches.
Sound is bad directly after
power is turned on. Water droplets may form
on the internal lens when
the car is parked in a
humid place. Let dry for about 1 hour with the
power on.
■ To protect the system, this unit has been equipped with self diagnostic functions. If a fault
arises, a warning is issued by various error displays. Follow the corrective measures and
remove the fault.
10. ERROR DISPLAYS
Error Display Corrective Measure
This error display indicates that a fault has arisen in the
mechanism of the source unit (for example, the disc cannot be
ejected).
➜ Check the source unit.
This error display indicates that the pickup focus is off because
of a scratched disc or some other factor during source unit play.
➜ Check the compact disc.
This indicates that the CD’s TOC (table of contents) cannot be
read, for example because the selected disc is upside-down.
ER2
ER3
ER6