Dcp (detachable control panel), English, Removing the dcp – Clarion M335/M235 User Manual

Page 5: Attaching the dcp, Storing the dcp in the dcp case, Caution

Advertising
background image

English

6. DCP (Detachable Control Panel)

The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the boat.

Removing the DCP

1. Press the [FNC] button for 1 second or longer

to switch off the power.

2. Press in the [RELEASE] button.

The DCP is unlocked

3. Remove the DCP.

Attaching the DCP

1. Insert the right side of the DCP into the main

unit.

2. Insert the left side of the DCP into the main

unit.

Storing the DCP in the DCP Case

Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct orienta-
tion.)

• The DCP can easily be damaged by shocks. After

removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.

• When the release button is pressed and the DCP is

unlocked, the boat’s vibrations may cause it to fall.
To prevent damage to the DCP, always store it in a
protective case after detaching it.

• The rear connector that connects the source unit

and the DCP is an extremely important part. Be
careful not to damage it by pressing on it with fin-
gernails, pens, screwdrivers, etc.

Note:

If the DCP is dirty, wipe off with a soft, dry cloth only.

CAUTION

[RELEASE] button

DCP

DCP

2.

1.

DCP

DCP case

DCP Rear Panel

Source Unit Front

Source unit
connector

DCP
connector

M335/M235

7

Advertising