Cuddeback CUDDEVIEW X2 - Manual (Page 13)

11 10
CuddeView X2 allows you to delete individual images or all
images from your SD card. You must be in “view images” mode.
• Press Delete key.
once (to display single image delete).
twice (to display all-image delete).
three times (to exit delete mode).
• Select Yes to confirm, No to cancel by using arrow keys.
• Press to initiate delete operation.
• Deleted images can NOT be recovered.
Delete images
Delete key
Here is a simple, yet clever system for using your CuddeView
X2 to make checking scouting cameras more efficient.
• Each scouting camera has an SD card installed.
We recommend 1 GB cards for Cuddeback cameras.
• Install 2 blank SD cards into the CuddeView X2, one in the
Source card slot, one in the Destination card slot.
Again, we recommend 1 GB cards.
When checking your scouting camera, follow these
next steps:
• Remove the SD card from the scouting camera.
• Remove the blank Source SD card from CuddeView X2
and install this card into your camera. Re-arm the
camera. You are now finished with that camera.
• Install the camera’s SD card into CuddeView X2’s Source
card slot.
• Copy the images from the Source card to the Destination
card. While images are being copied you can leave the
area and travel to your next camera.
• Once the copy process is complete, delete the images
from the Source SD card (be careful, do NOT delete the
images from the Destination card).
(continued)
The “Rotation Method” for checking cameras