Cuddeback CUDDEVIEW X2 - Manual (Page 5)

CuddeView X2 operates on
4 “AA” batteries.
• Slide bottom cover (on
back of CuddeView X2)
down to expose battery
compartment.
• Install batteries and
replace cover.
• Battery life indicator
appears on LCD screen
when CuddeView X2 is
powered on.
• Remove batteries when
CuddeView X2 will not be
used for one month or
more. Dead batteries can
leak acid and destroy
your product.
Install batteries
µ µ
3 2
CuddeView X2 takes SD cards. It will hold two SD cards
which allows you to copy images from one card to the other.
• Only install or remove SD cards when CuddeView X2
is off!
• Install SD cards with label facing down into either slot
(see below). Installing an SD card incorrectly will
damage your CuddeView X2.
• Push card all the way in until it “clicks.”
• To remove the SD card
push it in until it “clicks”
and pops part way out.
• CuddeView X2 will allow
you to view images with
a single SD card in
either slot.
• CuddeView X2 will allow
you to copy images from
Source card to Destination
card (see Copy images
section on page 9).
Install SD card(s)
µ
µ