Pad options, Sound bank b – Dave Smith Instruments TEMPEST User Manual

Page 20

Advertising
background image

10 Pad Options

Dave Smith Instruments

Pad Options

The buttons in this section provide a variety of useful tricks to get the most out of

using the pads for playing both sounds and beats.

Sound Bank B

Sixteen additional Sounds can be stored and accessed per Beat for a total of 32.

Sounds in bank B are designated B1 through B16. Press S

ound

B

ank

B to toggle

between banks A and B.

• While holding C

oPy

to copy a sound, use S

ound

B

ank

B to switch between

banks.

• To erase a Sound in Sound Bank B from a Beat, select S

ound

B

ank

B

before or after holding e

RaSe

, and then hit a pad to erase that sound.

Sound Bank B

Press to select an

additional bank of

16 sounds.

Reverse

When on, sounds

will play and record

in reverse.

Fixed Level

If off, sound pads are touch-sensitive,

playing louder when hit harder. If on,

sounds always play at a fixed velocity

level, set in the System settings.

Roll

If Pad Function = 16 Sounds, 16 Tunings or 16 Volumes:

While playing, if Roll is on and a sound pad is held, repeated notes will be

created at the Quantize rate

(Set in the 16 Sounds screen). Varying pad pressure varies the velocity

level of the repeated notes. Use 1/32 or 1/32 Triplet quantize for rolls, or

1/16 note quantize for natural-sounding 1/16 note hihat parts.

If Pad Function = 16 Beats:

If Roll key is held, the beat stutters, looping a short portion until released.

The roll rate of repeat is set by the Beat Roll setting in the 16 Beats screen.

(Select 16 Beats and Pads.)

The Roll key is normally momentary (on while held). However, a quick

press will toggle between on and off states.

Advertising