Dynojet 250: Eddy Current Brake Driveline Upgrade - Manual (Page 7)

D R I V E L I N E U P G R A D E I N S T A L L A T I O N
Remove the Existing Connecting Arms and Couplers
Version 1 Model 250 Eddy Current Brake Driveline Upgrade Installation Guide
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REMOVE THE EXISTING CONNECTING ARMS AND COUPLERS
This section will walk you through removing the eddy current brake from the dyno
and removing the existing connecting arms and couplers.
You will need to provide equipment capable of moving the eddy current brake.
R EMOVING THE H OOD
1 Remove the four bolts securing the eddy current brake cover and set aside.
2 Remove the two bolts securing the hood keepers to the brake and set aside.
Figure 1: Remove the Brake Cover and Hood Keepers
brake cover
hood keepers