Dynojet 224: Pit Installation Guide - Manual (Page 9)

In Ground Model 224 Automotive Dynamometer Installation Guide
1-1
C
H A P T E R
1
S
PECIFICATIONS AND
O
PERATING
R
EQUIREMENTS
Thank you for purchasing Dynojet’s In Ground Model 224 Automotive Dynamometer
(dyno). Dynojet’s software and dynamometers will give you the power to get the
maximum performance out of vehicles you evaluate. Whether you are new to the
benefits of a chassis dynamometer or an experienced performance leader, the
repeatability and diagnostic tools of WinPEP 7 software and a Dynojet dynamometer
will give you the professional results you are looking for.
This document provides instructions for installing the dyno. This document will walk
you through operating requirements, installation, and basic dyno operation. To
ensure safety and accuracy in the procedures, perform the procedures as they are
described.
Document Part Number: 98210100
Version 4
Last Updated: 04-29-08
This chapter is divided into the following categories:
• Introduction, page 1-2
• Dyno Specifications and Requirements, page 1-5
• Model 224 In Ground Dynamometer, page 1-9
• Dyno Electronics, page 1-10
• Pit Specifications, page 1-11