Dyras SBL-240 - Manual (Page 4)

SBL-240
4
Instruction Manual for the INOX smoothie blender model dyras SBL-240
NOTES
Please read the instruction manual thoroughly before using your new appliance. It is important to keep these
instructions as a useful reminder that’ll help you enjoy the many features available. The manufacturer is not
responsible if the appliance becomes damaged or defective as a result of the user not following the information
included in the instruction manual. If the appliance becomes faulty during regular use, it should only be repaired
by an authorised service engineer.
IMPORTANT SAFETY INFORMATION
The following safety instructions must be followed when using the appliance.
Please read this section very carefully!
Of course, it’s not possible for us to anticipate or provide safety rules for every specific situation, so we ask you to
apply commonsense precautions when using the appliance in a situation that isn’t described below.
• This appliance has been designed for household use only, no other (heavy duty) uses are permitted.
• Never use the appliance outdoors.
Warning! Always disconnect the appliance from the mains when you’ve finished using it or are
taking a break, even if it’s only for a short period of time.
• This device is not supposed to be used by physically or mentally handicapped people, or persons without
experience or knowledge (including children, as well), unless such a person supervises or guides their use of
the device, who is at the same time responsible for their safety. As for children, supervision is recommended
to make sure that they do not play with the device. This device is not supposed to be used by children under
the age of 14, not even with supervision!
• In order to avoid an electric shock, never dip the equipment or its electric cable or connector into water or
other liquid. Don’t allow water or other liquid to splash onto the engine unit, and do not touch it with wet
hands. Do not operate the equipment near a bowl containing liquid. Always connect the equipment to the
electric network with dry hands. The equipment casing, network cable and connector, as well as the network
socket, must always be dry. Should the equipment fall into water whilst you are operating it, despite you
taking all precautions, you must first unplug it from the mains electricity before touching it. Only take it out
of the liquid after it has been disconnected.