Eden NA600 - Manual (Page 4)

4
Gain Booster Switch
This switch is set up to let you switch between standard gain and high
gain on the fly. The Booster switch provides 6 dB of Boost to the signal
when engaged. The light is on in the High gain position. Engaging the
high gain switch may also work very well for older very low output
Instruments.
Edge Control
This is a great new feature for Nemesis. It allows you to dial in as much
or as little vintage tube style distortion as you like. The control produces
a warm single sided even order harmonic distortion that sounds just like
the old tube heads. With the control at (min.) the circuit is bypassed. The
farther to the right you turn the control the more distortion you will get.
The distortion is fairly subtle at low input levels and is more pronounced
at high gain settings.
Enhance Control
The Enhance control is a complex tone shaping pre-set. It is designed to
boost the lower Bass frequencies, to scoop out the low midrange and
boost the high end up all at the same time. The control is designed to
give you a very quick and simple way to get a good quality modern Bass
tone. 12:00 is considered about max. effect on this control and min. is
off. This can be blended with the other controls to create many unique
sounds.
Mute to Tune
When this switch is engaged it mutes both the stage sound and the D.I.
send. Only the tuner output stays hot. The Mute is on or muted when the
LED is on.