Eden WP100 Navigator (2003) - Manual (Page 12)

12
Normal set for the USA 120V 60Hz : White (Neutral )to P9, Black to (AC
Hot ) P11.
Japan 100V 60Hz: White to P10 (20V) Black(AC hot ) to P11.
Western Europe most EC counties and Italy 240/230V 50Hz: White
(Neutral) to P9 0V Black (AC Hot)to P12.
Switzerland 220V 50Hz: White (Neutral) to P10 Black (AC hot) to P12.
For your protection always use a correctly grounded AC
receptacle only. Do not disconnect your ground plug. This
is your safety ground.
Creating your Own Sound
We have found this to be one of the best ways to get your sound set up with
a minimum of hassle.
Start by setting your Preamplifier Flat
Turn the Enhance and the Character Controls to off or Min.
Set the Preamplifier Gain to about 11:00 to 12:00 to start with . Set the
master to about 10:00 or until things are at a good moderate listening level.
Start with the Enhance Control rotate it while playing. This alone may give
you the sound your looking for. If that's not it, turn the Enhance back off and
lets go to the Tone Controls.
We suggest that you start working with the higher frequencies first and then
build the Midrange sound before going down to the Bass end of the controls.
To Sum things up
You will always have the best success creating a great tone if you work
around the natural tone of your instrument. In general, less is best with
respect to Tone controls and Equalizers. Remember they cut as well as boost
both options are very powerful in effecting the overall tone of your rig.