EFCO S5600 Inside Glazed User Manual
Page 7
Advertising
EFCO CORPORATION 6/2012 PART NO. Y304
Page 7 of 29
Series 5600 Inside Glazed Installation Instructions
Section III: Anchor Installation
1" MIN.
1" MIN.
Dead-Load Anchor
Bolted to building structure
Wind-Load Anchor
Bolted to building structure
See page #6 of 23
A steel plate is factory welded to the steel
channel and is sized per job requirements.
Refer to the shop drawings
Size and locate anchor bolts based
on the job conditions and the
structural requirements. Refer to
the approved shop drawings
Note: Elevation of slab must be within the adjustment limits of the anchoring system.
See approved shop drawings for limitations
Advertising