Elecraft P3 High-Performance Panadapter Manual - Manual (Page 35)

35
P3SVGA Option Menu
Entry Default Description
SVGA bias 2.7
Changes the waterfall color rendition on the external display (See SVGA
Waterfall Color Bias
on page 23).
SVGA data Off
Enable/Disables data display on external display (see Data Terminal Setup on
page 24)
SVGA en On Enable/disables the external display (see SVGA Display On/Off on page 23)
SVGA fill Off
Fill space below spectrum line or leaves it open on the external display (see
Spectrum Display Fill
on page 23)
SVGA fntD 0
Sets font size in data window on the external display(see Adjusting the
Receive and Transmit Windows and Font Size
s on page 24)
SVGA font 0
Sets font size on the external display except for the font used in the data
window (see SVGA Font Size on page 23)
SVGA FW N/A Displays the SVGA firmware version.
SVGA res 1280x1024 Sets the resolution on the external display (see Set Resolution on page 23)
SVGA Ubmp N/A
Saves screen bitmap to external device via keyboard USB connector (see
Screen Capture
on page 28)
SVGA Urst N/A
Restores messages and macros saved to an external device (see Test Message
and Macro Save and Restore
on page 29).
SVGAUsav N/A
Saves messages and macros to an external device (see Test Message and
Macro Save and Restore
on page 29).
SVGA WinR 4
Sets receive data window size on the external display (see Adjusting the
Receive and Transmit Windows and Font Sizes
on page 24).
SVGA WinT 3
Sets the transmit data window size on the external display (see Adjusting the
Receive and Transmit Windows and Font Sizes
on page 24).