ETS-Lindgren 6512 Shielded Loop Antenna - Manual (Page 25)

www.ets-lindgren.com Operation 25
 Power cord—To maintain safety requirements, use the
safety-approved power cord provided. If you use another method to
attach the battery charger to the power mains, use only a type HD21
(PVC cord) or type HD22 (rubber cord) with a nominal cross-section of
0.75 mm
2
.
F AST C HARGE AND T RICKLE C HARGE M ODES
The battery charger provides both fast and trickle charge operation. Switching
from one charge mode to the other occurs automatically.
 Fast Charge mode—The battery charger is in fast charge mode when
the
Fast Charge LED is illuminated. This LED illuminates when the
battery is charging, and becomes darker or blinks when the battery is
fully charged. When the battery charger completes the fast charge
cycle, it will automatically switch to trickle charge mode.
 Trickle Charge mode—The battery charger is in trickle charge mode
when the
Power On LED is illuminated and the Fast Charge LED is
dark.
When not in use, connect the loop antenna to the battery charger in
trickle charge mode.