Canon CR-2 - Manual (Page 43)

Appendix
43
EMC (Electromagnetic Compatibility)
This instrument conforms to the EMC standard IEC 60601-1-2.
Guidance and Manufacturer’s Declaration for Electromagnetic Emission
The CR-2 is intended for use in the electromagnetic environment specified below.
The customer or the user of the CR-2 should assure that it is used in such an environment.
Emission Test Compliance Electromagnetic Environment – Guidance
RF emissions
CISPR11
GROUP 1
The CR-2 uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electromagnetic equipment.
RF emissions
CISPR11
Class B The CR-2 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker emissions
IEC 61000-3-3
Complies