Gastroback 42429 Design Kettle Advanced Pro - Manual (Page 7)

20 21
First use
Remove and safely discard any packaging material or promotional labels attached to your
kettle. It is recommended that before first use to fill the kettle to the maximum level with
cold tap water (drinking quality), bring to the boil by selecting the BOIL 100° button, then
pour the water out. Your kettle will only operate when positioned on the power base. The
kettle will automatically switch off when the water has reached the selected temperature.
CAUTION: The lid opens automatically just by pressing the opening button. Ensure that
there are no objects in the interior of the kettle. Do not immerse the kettle base, switch
area, power base or power cord in water, or allow moisture to come in contact with these
parts.
NOTE: Your kettle will only operate when positioned on the power base, the connector of
the power base is placed into the socket outlet and the appliance is switched on. The kettle
will automatically switch off, once the water is boiling. Too little water will result the kettle
switches off before the water starts boiling.
Operating your Design Kettle Advanced Pro
CAUTION! Only fill with pure drinking water. Do not fill any other liquids or foodstuffs into
the water container and do not add any additional ingredients, such as spices or flavours.
Do not place any foreign objects in the water container. Do not drip or spill any liquids on
the exterior of the kettle or on the power base.
Ensure the kettle is filled with the appropriate amount of water (water level between 500/
MIN and 1700/MAX) before switching on the appliance.
WARNING! Do not use any extension cord or multi socket outlet to avoid risk of fire and
electric shock. Always connect the appliance directly to a separately protected mains pow-
er supply wall socket with protective conductor (earth/ground) connected properly (See
„Important safeguards for electrical appliances“).
Do not operate the appliance on an inclined surface, to avoid scalding and damage by
boiling water overflowing the brim of the kettle.
Immediately switch off and unplug the appliance, if water leaks out of the kettle.
1. Prepare the power base for use.
Completely unwind the power cord from the cord storage and insert it in the gab on the
bottom of the power base. Place the power base on an appropriate surface (level, dry,
water-resistant and heat-resistant). During operation, always keep the appliance away
from other objects: leave at least 20 cm of free space on each side and 1 m of free space
above the appliance. Ensure, that the power base will not tilt or wobble.
2. To fill the kettle, remove the kettle from the power base and open the lid by pressing the
lid release button. Fill with the desired amount of water. Always fill the kettle between the
minimum (MIN 500) and maximum (MAX 1700) marks on the water window. Too little
water will result in inaccurate temp readings in the kettle or switching off before the water
has reached the selected temperature.