Gastroback 42429 Design Kettle Advanced Pro - Manual (Page 9)

22
5. Press the START/CANCEL button and the surround will illuminate in red, the selected
temperature button surround will illuminate and the kettle will start heating. Do not remove
the kettle from the power base during operation. Ensure the kettle has switched off after the
water has boiled or the selected temperature has been reached before removing the kettle
from the power base. If the kettle is removed from the power base during the KEEP WARM
function the kettle will automatically switch off.
6. If the KEEP WARM function has been selected, the KEEP WARM button surround will
remain illuminated in red, the selected temperature button surround will remain illuminated
in light blue, and the kettle will maintain the desired setting for 20 minutes.
The KEEP WARM function can be used before, during or on completion
of the water heating. When the water has reached the selected Celsius
temperature, the KEEP WARM function will hold the selected tempera-
ture for 20 minutes. If the 100° button is selected when using the KEEP
WARM function, the boiled water will remain at approximately 95°
Celsius for 20 minutes. To activate the KEEP WARM function, first press
the desired water temperature button from the five options on the control panel. Then press
the KEEP WARM button, followed by the START/CANCEL button to commence heating
the water. Alternatively, the KEEP WARM button can be activated at any time during the
heating cycle and/or within one minute after the heating cycle has completed.
If the kettle is removed from the power base during the KEEP WARM function the kettle will
automatically switch off.
Note: If temperature is changed during the KEEP WARM function, the START/CANCEL
button surround will illuminate in red.
7. If further heating of the kettle is not required, switch off at the power outlet, unplug the
power cord and empty the water from the kettle. Replace the kettle onto the power base
and close the lid.
NOTE: The default temperature setting of the kettle when plugged on at the power outlet is 100°.
– When the kettle is switched off at the power outlet and switched back on, it will automa-
tically default to the 100° temperature setting.
– When the kettle remains switched on at the power outlet and different temperature set-
tings have been selected, the kettle will default to the last selected temperature setting.
WARNING: Do not open the lid during and after operation. This may result in boiling
water splashing from the kettle. Pour all the hot water from the kettle before opening the lid
to refill.
23