Habey PRO-6820 - Manual (Page 52)

4.2.8 Super IO Configuration
Serial Port 1 Configuration
1) Serial Port
Enable or disable the serial port.
2) Device Setting (Read Only)
Display serial port IRQ and Base Address
3) Change Setting
This option is used to change serial port settings. System default setting:
[Auto].
Device Power-up Delay
Device Power-up Delay: Set the maximum delay time for USB device
report to Master controller.
USB Mass Storage Device
This option is used to set the USB device type connected, including
[Auto][Floppy][Forced FDD][Hard Disk][CD-ROM]. System default [Auto].
47