Habey PRO-6820 - Manual (Page 64)

Appendix
Appendix 1: Install Driver
Please install the driver as per the following steps:
Insert the programmed disk into CD-ROM, so installation of the driver
can be made either automatically or manually. Now manually installation
instructions are given as below:
1. A variety of options are available regarding manually installation, which
you can check from Device Manager.
2. Right click “my computer “, select “management”, and go to “Device
Manager”
3. Right click “display controller” in the menu of graphic card, select
“Properties “, click “Driver”, select “update driver”.
4. Select “Show the list of all drivers which are designated locations so
that choices can be made from it “, select “next.”
5. Select the location of display driver, click “ok”
6. Complete the installation, restart the system.
Proceed with the installation of other drivers after restarting the system,
till all installations are completed. Then user can check from the device
manager that it says device is working.
Note: If system prompts the message “Reboot the Computer” in the pro-
cess of installing drivers, we need to restart the computer as per system
prompts.
59