Hollywood Racks HR1000 SportRider 2 bike - Manual (Page 4)

Step 6 B: Installing into a 2” trailer hitch
Place lock washer and flat washer onto hitch pin
bolt as indicated. Insert the receiver tube into the
hitch. Align the holes, insert the hitch pin bolt
and tighten securely using a ¾” wrench.
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Install Hitch pin clip
after tightening bolt
Important! When inserting the hitch pin
bolt, the bolt should pass through the
receiver tube first then through the
plastic spacer.
Folding Down Vertical Post
For easy access to the cargo area, the vertical post can
be folded down. To fold down vertical post, rotate and
remove the side-retaining pin as shown in Fig. 16a-16d.
Be sure to re-tighten the thumbscrew after replacing pin.
16c
16d
16b
16a
4