Canon FS 2720 U - Manual (Page 9)

9 CanoScan FS2720U Film Scanner
Safe Locations
Follow the guidelines below to locate a safe place to operate the scanner.
• Operate the scanner within the following parameters.
- Temperature range: 5
°
to 35
°
C (41
°
- 95
°
F)
- Humidity range: 10% to 90% relative humidity (without condensation)
• Operate the scanner with a power supply conforming to the following param-
eters.
- Voltage: 110V (10% volts alternating current)
- Frequency: 50/60 Hertz
• Ensure that there is sufficient clear space around the scanner. The diagram
illustrates the space that should be kept clear as viewed from directly above
the unit.
• The interface cable supplied with the scanner is 1.85 meters (6 feet) in length.
Ensure that the scanner is placed within its reach.
• Do not place it in locations subject to extreme changes in temperature or
humidity, which may cause condensation to form and reduce the scanner’s
image quality. If the scanner is being transported from a high temperature to a
low temperature, or vice versa, allow the unit sufficient time to adjust to the
new temperature before using it.
• Do not use the scanner in places subject to direct sunlight or strong light.
There is a risk that the elevated temperature of the internal components may
cause a malfunction or degraded performance. Shield it with thick curtains if a
location subject to direct sunlight is unavoidable.
Film Insertion
Direction
Approx.
20cm (8 in.)
Approx.
10cm (4 in.)
Approx.
10cm (4 in.)