Hybrid Racing WaveTrac LSD - Manual (Page 3)

3
STEP 4B:
Remove the drain plug (using the
end of a 3/8" socket wrench or
extension) and filler plug (using a
17mm socket).
Reassembly Tips:
Torque the drain plug to 29 ft-lb
(39 N-m) and the filler plug to 33
ft-lbs (44 N-m).
STEP 4A:
Remove the 10mm flange bolt
using a 14mm socket.
Reassem-
bly Tips:Torque to 33 ft-lb (44 N-
m).
Install Guide
STEP 3B:
Unbolt and remove the shift lever
assembly and the two dowel pins
that line it up with the transmis-
sion case. There should be 4
bolts alltogether. Again, you may
have to twist this part back and
forth to get it loose.
Reassembly
Tips:Remember to install the two
dowel pins to aid in alignment.
The 4 bolts should be torqued to
9 ft-lb (12 N-m).