Clarion SIRIUS DSC920S - Manual (Page 6)

6
DSC920S
English
● Manual memory
1. Select a channel to be memorized.
2. Press the [P-M] button to enter the Preset
memory mode.
∗
The reception channel number (“CH 051”) in
the Operation status indication blinks and the
PRESET indication light.
3. Press the [ w ] or [ z ] button to select a pre-
set number to be memorized.
∗
The selected preset number is displayed in
the Preset channel indication.
4. Press and hold the [P-M] button for 2 sec-
onds or longer to store the channel being re-
ceived in memory.
∗
If the [P-M] button is released within less than
2 seconds, preset memory is cancelled and
the Preset memory mode is terminated.
Scan function
There are two scan modes: a category scan
mode and a preset scan mode.
During scanning channels are displayed in ab-
breviated form and the display mode cannot be
switched.
● Category scanning
In a category scan, broadcast channels in the
same category as the current channel are se-
lected about every 10 seconds.
1. Press the [SCAN] button to start a category
scan.
2. Press the [SCAN] button to cancel a cat-
egory scan.
Note:
• Category scanning is not available when no cat-
egory is defined for the current channel.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press and hold the [SCAN] button for 1 sec-
ond or longer to start a preset scan.
2. Press the [SCAN] button to cancel a preset
scan.
Receiving stations selected by
category
1. Press the [CAT] button to enter the category
selection mode. CAT indication is light in the
display.
2. Press the [ w ] or [ z ] button to select a cat-
egory.
3. Press the [ a ] or [ d ] button to tune in a sta-
tion.
Notes:
• When the category selection mode is entered, the
category of the last received channel is displayed
first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
• Press the [ a ] or [ d ] button within 7 seconds af-
ter a channel has been set to continue seeking
channels up or down. The category selection
mode is canceled and normal reception is re-
sumed if no operation is performed for 7 seconds.
Switching the text display
1. Press the [DISP] button. Each time the
[DISP] button is pressed, the item changes in
the following order:
channel number ➜ channel name (long) ➜
title ➜ artist ➜ category ➜ R-TEXT
∗
When the [DISP] button is pressed while the
Screen saver mode is engaged, the displayed
text cannot be switched. If this happens, re-
lease the Screen saver mode and scroll the
displayed text again.
∗
If the reception channel is changed, the dis-
play changes in the order of channel number
➜ channel name (short) and then the original
display mode is resumed.
∗
When there is no text information, the indica-
tion “--------” will appear on the display.
About the scrolling of the displayed text
Scrolling is performed once when the title being
selected is changed or when the [DISP] button
is pressed and held for 1 second or longer.
∗
Scrolling is not performed when a channel number,
abbreviated channel name or category is displayed.
Operations