Jacking instructions – Jeep 2013 Grand Cherokee SRT - Owner Manual User Manual

Page 524

Advertising
background image

4. Place the shift lever into PARK.

5. Turn the ignition OFF.

6. Block both the front and rear of the wheel diagonally

opposite of the jacking position. For
example, if changing the right front
tire, block the left rear wheel.

NOTE:

Passengers should not remain

in the vehicle when the vehicle is
being jacked.

7. For vehicle equipped with Quadra-Lift® refer to

“Quadra-Lift® — If Equipped” in “Starting And
Operating” for further information on disabling auto-
matic leveling.

Jacking Instructions

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from the

edge of the roadway as possible before raising the
vehicle.

Turn on the Hazard Warning flasher.

Block the wheel diagonally opposite the wheel to

be raised.

Set the parking brake firmly and set an automatic

transmission in PARK.

Never start or run the engine with the vehicle on a

jack.

(Continued)

522

WHAT TO DO IN EMERGENCIES

Advertising
This manual is related to the following products: