Jump-starting procedure – Jeep 2013 Grand Cherokee SRT - Owner Manual User Manual

Page 534

Advertising
background image

3. Remove the protective cover over the remote posi-

tive (+) battery post. Pull upward on the cover to
remove it.

4. If using another vehicle to jump-start the battery, park

the vehicle within the jumper cables reach, set the
parking brake and make sure the ignition is OFF.

WARNING!

Do not allow vehicles to touch each other as this
could establish a ground connection and personal
injury could result.

Jump-Starting Procedure

WARNING!

Failure to follow this procedure could result in per-
sonal injury or property damage due to battery ex-
plosion.

CAUTION!

Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.

1. Connect the positive (+) end of the jumper cable to the

remote positive (+) post of the discharged vehicle.

2. Connect the opposite end of the positive (+) jumper

cable to the positive (+) post of the booster battery.

532

WHAT TO DO IN EMERGENCIES

Advertising
This manual is related to the following products: