Spare tire stowage, Spare tire removal, Preparations for jacking – Jeep 2013 Patriot - Owner Manual User Manual

Page 419

Advertising
background image

Spare Tire Stowage

The compact spare tire is stowed under the rear load floor
in the cargo area.

Spare Tire Removal

Lift up the load floor cover and remove the hold down.

Preparations For Jacking

1. Park the vehicle on a firm level surface, avoiding ice or

slippery areas.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic, pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever in PARK (automatic transmission)

or REVERSE (manual transmission).

5. Turn OFF the ignition.

6. Block both the front and rear of the wheel diagonally

opposite the jacking position. For
example, if changing the right front
tire, block the left rear wheel.

NOTE:

Passengers should not remain in the vehicle

while the vehicle is being jacked.

6

WHAT TO DO IN EMERGENCIES

417

Advertising
This manual is related to the following products: