Jeep 2013 Patriot - Owner Manual - Manual (Page 52)

1. Remove the mini-latch and regular latch from its
stowed position in the right rear side trim panel.
2. Grasp the mini-latch plate and pull the belt over the
seat.
3. Route the shoulder belt to the inside of the right head
restraint.
4. When the belt is long enough to fit, insert the mini-
latch plate into the mini-buckle until you hear a
“click.”
5. Sit back in the seat. Slide the regular latch plate up the
webbing as far as necessary to allow the belt to go
around your lap.
Mini-Latch Stowage
Routing The Rear Center Shoulder Belt
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE