Enabling and disabling parksense – Jeep 2015 Grand Cherokee - Owner Manual User Manual

Page 237

Advertising
background image

Front Park Assist Audible Alerts
ParkSense® will turn off the Front Park Assist audible

alert (chime) after approximately 3 seconds when an

obstacle has been detected, the vehicle is stationary, and

brake pedal is applied.
Adjustable Chime Volume Settings
Front and Rear chime volume settings can be selected

from the Uconnect® System. Refer to ЉUconnect® Set-

tings” in “Understanding Your Instrument Panel” for

further information.
The chime volume settings include LOW, MEDIUM, and

HIGH. The factory default volume setting is MEDIUM.
ParkSense® will retain its last known configuration state

through ignition cycles.

Enabling And Disabling ParkSense®

ParkSense® can be enabled and disabled with the

ParkSense® switch.

When the ParkSense® switch is pressed to dis-

able the system, the instrument cluster will dis-

play the “PARKSENSE OFF” message for ap-

proximately five seconds. Refer to “Driver

Information Display (DID)” in “Understanding Your In-

strument Panel” for further information. When the shift

lever/gear selector is moved to REVERSE and the system is

disabled, the DID will display the “PARKSENSE OFF”

message for as long as the vehicle is in REVERSE.
The ParkSense® switch LED will be ON when

ParkSense® is disabled or requires service. The

ParkSense® switch LED will be OFF when the system is

enabled. If the ParkSense® switch is pressed, and the

system requires service, the ParkSense® switch LED will

blink momentarily, and then the LED will be ON.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235

Advertising