Rear wiper blade removal/installation – Jeep 2015 Grand Cherokee - Owner Manual User Manual

Page 621

Advertising
background image

Installing The Front Wipers

1. Lift the wiper arm off of the glass, until the wiper arm

is in the full up position.

2. Position the wiper blade near the hook on the tip of the

wiper arm with the wiper release tab open and the

blade side of the wiper facing up and away from the

windshield.

3. Insert the hook on the tip of the arm through the

opening in the wiper blade under the release tab.

4. Slide the wiper blade up into the hook on the wiper

arm and rotate the wiper blade until it is flush against

the wiper arm. Fold down the latch release tab and

snap it into its locked position. Latch engagement will

be accompanied by an audible click.

5. Gently lower the wiper blade onto the glass.

Rear Wiper Blade Removal/Installation

1. Lift the rear wiper arm pivot cap away from the glass

to allow the rear wiper blade to be raised off of the

glass.

NOTE:

The rear wiper arm cannot be fully raised off the

glass unless the wiper arm pivot cap is unsnapped first.

Attempting to fully raise the rear wiper arm without

unsnapping the wiper arm pivot cap may damage the

vehicle.

7

MAINTAINING YOUR VEHICLE 619

Advertising