Specifications, Save this manual, Safety warnings and precautions – Chicago Electric 39954 User Manual

Page 2: Read all instructions before using this tool

Advertising
background image

Page 2

SKU 39954

For technical questions, please call 1-800-444-3353.

REV 08b, 08k

SPECiFiCATiOnS

Battery Type

Sealed, lead-acid, rechargeable, 17 Ah

Power Output

12 VDC, 900 amps peak; 400 amps starting power

Cables

Rubber insulated (#4) copper; 400 amp clamps

Compressor

260 PSI maximum pressure

Output Socket

12 VDC Cigarette lighter output

Features

Overload protection

Automatic charge cutoff (at 14.5~15.5 volts) to help

prevent overcharging
Inflating Needle and Air Raft Tips

note: Performance of this unit may vary depending on variations in local line voltage.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,

operating and maintenance procedures, parts list and diagram. Keep your invoice with this

manual. Write the invoice number on the inside of the front cover. Keep the manual and

invoice in a safe and dry place for future reference.

SAFETy WARningS And PRECAUTiOnS

WARNING:

When using tool, basic safety precautions should always be followed to reduce

the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

Wear eye protection.

1.

When working on or around lead-acid batteries, always wear

ANSI-approved eye protection.
Avoid contact with Battery Acid.

2.

If splashed, immediately wash effected area with

clean water. Continue washing area until medical help arrives.
Connect cables to proper polarities.

3.

Connect RED POSITIVE (+) cable to Positive

Battery Terminal first. Connect BLACK NEGATIVE (-) cable to body ground (a non moving

metal part) second.

do not connect the BlACK nEgATiVE (-) cable to the negative

Battery Terminal. Turn vehicle ignition off before making cable connections.
Use this tool in well ventilated areas.

4.

Do not attempt to jump start vehicle around

flammable gases or liquids.
do not allow the Black and Red clamps to touch.

5.

If this happens it can melt clamps

or other metal objects. Place them only on the corresponding terminals.
12 Volt Systems Only.

6.

Use only with vehicles and boats with 12 volt electrical sys-

tems.
For emergency use only.

7.

Do not use this system in the place of a vehicle battery. Only

use to jump start your vehicle.
Avoid working alone

8.

. If an accident happens, an assistant can bring help.

Advertising