Battery disposal, Please read the following carefully – Chicago Electric 39954 User Manual
Page 7
Page 7
SKU 39954
For technical questions, please call 1-800-444-3353.
Lift the Battery (20) out of the compartment.
3.
Detach the jumper cables and the recharging wires from the battery terminals. Make
4.
sure that red and black jumper cables stay with their recharging wires and are not
switched.
Remove the dead battery.
5.
Attach the jumper cables and recharging wires to the terminals of the new battery; red
6.
cable to positive terminal, black cable to negative terminal. Make sure that the battery
has the label facing out from the back of the Jump Start System.
Place the new battery into the System, taking care not to damage the Circuit Board
7.
(7).
Reattach the Battery Bracket (12) with the 2 Phillips head Screws (24).
8.
At this time you may also replace the fuses in the fuse box, by removing the failed
9.
fuse and replacing with a new fuse.
Attach the battery Cover (5) using the 8 Phillips head screws (27).
10.
Recharge new battery using the 12 volt Adapter (22) for at least 4 hours.
11.
Battery disposal
After the battery in the Jumpstarter System has expired, it should be recycled.
Some States require this recycling. Contact your local solid waste authority for recycling
information.
Warning:
Do not dispose of battery by fire. This could result in an explosion. Before dis-
posing of battery, cover exposed terminals with heavy duty electrical tape to prevent
shorting. Do not expose battery to intense heat or fire as this could cause an explo-
sion.
PlEASE REAd ThE FOllOWing CAREFUlly
THE mANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEmBLy DIAGRAm IN THIS mANUAL AS A REFERENCE TOOL ONLy. NEITHER
THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WAR-
RANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO mAKE ANy
REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy
PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEmENTS SHOULD BE
UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUy-
ER. THE BUyER ASSUmES ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEmENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEmENT PARTS THERETO.