Kendon Single Ride-Up SRL Stand-Up - Manual (Page 14)

714-630-7144 www.KendonUSA.com
- 12 -
One (1) ramp pin can be stored on the side of either one of the side ramps.
Make sure to slide the ramp pins all the way through so that the lock button
is popped out on the opposite end of insertion point.
Position the open diamond shape of the expanded metal on the ramp with the
attachment points on the trailer. Attach T-Bolts through the ramp and tighten.
Ramps must be properly mounted on the trailer with supplied mounting
hardware firmly tightened down. Loose mounting hardware can cause a ramp
to come off of the trailer causing serious damage or injury to following traffic.
Owner assumes responsibility for properly securing ramps.