Kontron CP3002-RA - Manual (Page 20)

Introduction CP3002-RC/CP3002-RA
Page 1 - 4 ID 1039-3625, Rev. 1.0
P R E L I M I N A R Y
1.2 Board-Specific Information
The CP3002-RC/CP3002-RA is a CompactPCI single-board computer based on the Intel®
Core™ i7 processor and specifically designed for use in highly integrated platforms with solid
mechanical interfacing for a wide range of industrial environment applications.
Some of the CP3002-RC/CP3002-RA's outstanding features are:
• Support for the Intel® Core™ i7-620LE (LV) processor, 2.0 GHz
• Intel® QM57 Express chipset
• Up to 8 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1066 MHz
• Integrated 3D high-performance graphics controller with one high-resolution graphics inter-
faces (VGA)
• 32-bit, 33/66 MHz PCI CompactPCI interface for support of up to four peripheral slots
(4x REQ/GNT signals)
• One Quad Gigabit Ethernet controller, Intel® 82580EB, providing four 10Base-T/100Base-
TX/1000Base-T Ethernet interfaces on the rear I/O
• Three Serial ATA interfaces with SATA RAID 0/1/5 support:
•
One onboard Serial ATA interface
• Two Serial ATA interfaces on the rear I/O
• Socket for one Serial ATA Flash module (SSD)
• Two USB 2.0 ports on the rear I/O
• Two serial ports on the rear I/O:
•
One RS-232 serial port
• One RS-422/RS-232 serial port
• TCG 1.2 compliant Trusted Platform Module (TPM), on request
• Two SPI Flash chips for redundant uEFI BIOS
• Watchdog timer
• Five general purpose inputs (GPI) and three general purpose outputs (GPO) on rear I/O
• Real-time clock (RTC)
• 4HP, 3U CompactPCI
• Rugged, conductive-cooled version with heat spreader or rugged, air-cooled version with
heat sink for forced airflow cooling
• Rear I/O on the CompactPCI connector J2
• AMI Aptio®, a uEFI-compliant platform firmware
1.3 System Expansion Capabilities
1.3.1 Serial ATA Flash Module
The CP3002-RC/CP3002-RA provides support for up to 32 GB of Serial ATA Flash memory in
combination with an optional Serial ATA Flash module, which is connected to an onboard ex-
tension connector. For further information concerning the Serial ATA Flash module, please re-
fer to Appendix A.
1.4 Board Diagrams
The following diagrams provide additional information concerning board functionality and
component layout.