Kontron CP381 - Manual (Page 25)

CP381 Introduction
ID 24107, Rev. 01 © 2002 PEP Modular Computers GmbH Page 1 - 9
1.6 Technical Specifications
Table 1-3: CP381 Main Specifications
GROUP TYPE DESCRIPTION
DI ProComm
Controller and
Related
FPGA Logic Device Provides CompactPCI interfacing and IO control logic
Peripheral
Memory
CapROM 4 kBit (512 byte) EEPROM
External
Interfaces
Digital Input One 62-pin, female, three row, D-sub connector
Supports up to thirty digital input channels
CompactPCI Bus One, 132-pin, female, six row connector (standard CPCI type
connector for J1)
Internal Interfaces
JTAG/ISP JTAG/ISP 10-pin SMD connector for programming and testing
purposes
Indicators Front Panel LED’s Two green LED’s to indicate operational status
General
Mechanical Conforms with IEEE 1101.1
Power Requirements Voltage: 3.3V
Power Consumption 370 mW maximum
Temperature Range Operational: 0ºC to +70ºC Standard
-40ºC to +85ºC E2
Storage: -55ºC to +125ºC
Humidity 0% to 95% non-condensing
Dimensions 100 mm x 160 mm single height Eurocard
Board Weight 145 grams
Software Driver
Information
(See note below)
PCI Header Device ID: 0x5555
Vendor ID: 0x1556
Class Code: 0x110000
Subsystem Device ID: 0x00E0
Subsystem Vendor ID:
0x1518
Note...
The Device ID and Vendor ID refer to the chip manufacturer. In the Class Code
value given, “11” relates to the data acquisition and signal processing control-
lers and “0000” relates to the DPIO modules. Subsystem Device ID and Sub-
system Vendor ID are defined by PEP.