Kontron Bootstrap Loader - Manual (Page 19)

Bootstrap Loader
2/98 Page 13 © PEP Modular Computers
4.6 Reset System
Syntax
rs
Description
This command exits the Bootstrap Loader and resets the system. It terminates the Bootstrap Loader command mode and resets
the complete system, generating a system reset with the on-board watchdog.
4.7 Help
Syntax
? or help
Description
This command prints the online help page. The display of the help text varies between the different CPUs reflecting the
difference of the CPUs.
4.8 Load and Update Modules
Syntax
ldmod [-qu]
Description
Without any parameters, the module is loaded or updated using S-records over the term port.
'-u' must be used to download over ser0.
'-q' suppress all messages except error messages.
Note: On CPUs without a ser0 serial connection the Bootstrap Loader will refuse a command including the ’-u’ option.
4.9 List Modules
Syntax
lsmod
Description
List all OS-9 modules in the programmable FLASH area. The display output is similar to the output of the OS-9 utility
'mdir -e'.