Kontron CP6005X-SA - Manual (Page 21)

D R A F T — F O R I N
T E R N A L U S E O N L Y
21 www.kontron.com
User Guide
CP6005(X)-SA
Th
er
m
al
Thermal Management CPU and board overtemperature protection is provided by:
» Temperature sensors integrated in the 4 th gen. Intel® Core™ i7/i5 processor:
» One temperature sensor for monitoring each processor core
» One temperature sensor for monitoring the graphics core
» One temperature sensor for monitoring the package die temperature
» One temperature sensor integrated in the Intel® QM87 Chipset for monitor-
ing the chipset
» One onboard temperature sensor for monitoring the board temperature
» Specially designed heat sink
Se
cu
ri
ty TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-based
data and system security
Sof
tware
uEFI BIOS Phoenix SecureCore Tiano™ (SCT) BIOS firmware based on the uEFI Specification
and the Intel Platform Innovation Framework for EFI:
» LAN boot capability for diskless systems (standard PXE)
» Automatic fail-safe recovery in case of a damaged image
» Non-volatile storage of setting in the SPI boot flash (battery only required
for the RTC)
» Compatibility Support Module (CSM) providing legacy BIOS compatibility
based on Phoenix SCT3
» Command shell for diagnostics and configuration
» uEFI Shell commands executable from mass storage device in a pre-OS envi-
ronment (open interface)
IPMI Firmware IPMI firmware providing the following features:
» Keyboard Controller Style (KCS) interface
» Dual-port IPMB interface for out-of-band management and sensor monitor-
ing
» IPMI over LAN (IOL) and Serial over LAN (SOL) support
» Sensor Device functionality with configurable thresholds for monitoring
board voltages, CPU state, board reset, etc.
» FRU Inventory functionality
» System Event Log (SEL), Event Receiver functionalities
» Sensor Data Record Repository (SDRR) functionality
» IPMI Watchdog functionality (power-cycle, reset)
» Board monitoring and control extensions:
» Graceful shutdown support
» uEFI BIOS fail-over control: selection of the SPI boot flash (standard/re-
covery)
» Field-upgradeable IPMI firmware:
» via the KCS, IPMB or IOL interfaces
» Download of firmware does not break the currently running firmware or
payload activities
» Two flash banks with rollback capability: manual rollback or automatic in
case of upgrade failure
Operating Systems There are various operating systems available for the CP6005(X)-SA. For further
information, please contact Kontron.
Table 1: CP6005(X)-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS