1 insertion and removal of the managed frus – Kontron RTM8050 User Manual
Page 17
Product Description
4
www.kontron.com
1.6.1.4.1
Insertion and Removal of the Managed FRUs
After insertion, the front board detects and activates the management components of the FRU. When the
handle is closed, the power budget and the e-keying negotiations start. Then, the front board's IPMC
activates the payload components of the FRU.
Opening the RTM handle switch on the RTM FRU and will start the deactivation process, which either
deactivates the whole board (front board, RTM and RTMHDD) or only the RTM8050 and its RTMHDD
mezzanine, depending on a configuration policy available through the CMOS configuration menu.
The operational state of the FRU is reported through the management subsystem FRU Hot Swap sensors. The
BLUE LED is 100% off when a FRU is operational and unsafe for extraction. An always on(100%) indicates
that a FRU can safely be extracted; transitional states are identified through blinking patterns. Additional
details on the standard FRU Hot Swap sensor and the BLUE LED usage can be found in the AdvancedTCA
specifications.