Kontron RTM8050 - Manual (Page 24)

Board Features
11 RTM8050
www.kontron.com
Table 2-6:Type 16 Module Current Requirements Records
2.8.4 MMC Firmware Code
MMC firmware code is organized into boot code and operational code, both of which are stored in a flash
module. Upon an MMC reset, the MMC executes the boot code and performs the following:
1 Self test to verify the status of its hardware and memory.
2 Performs a checksum of the operational code.
3 Set operational state that tells the boot block the firmware operate correctly.
Upon successful verification of the operational code checksum, the firmware will jump to the operational
code.
Manufacturer Name “Kontron”
Product Name type/length *Calculated
Product Name “RTM8050”
Product Part/Model Number type/length *Calculated
Product Part/Model Number "T5705_XX"*
Product Version type/length *Calculated
Product Version “XX” *
Product Serial Number type/length *Calculated
Product Serial Number Manufacturer S/N
Asset Tag type/length 0xC0
Asset Tag
FRU File ID type/length
*Calculated
FRU File ID bytes "FRU5705-YY"**
No more fields 0xC1
Padding 0x00
Product Info Area Checksum *Calculated
Type 16 – Module Current Requirements Record
Record Type ID C0h
Record format version 02h
Manufacturer ID 00315Ah (PICMG Record ID)
PICMG Record ID 16h (Module Power Descriptor table)
Record Format Version 00h
Current Draw 0Ch (1.2 Amps at 12 V => 14.4 Watts)
Product Information Area